Remote Biodynamic Sensing and
the "Biogram"
by
Michael Theroux
Methods of Biodynamic Signal Translation
The plant response detector or signal processing translator detailed
in "Detecting Biodynamic Signals" represents only a fraction of the
equipment used in the disclosure of biodynamic signals.
Dr. Lawrence
utilized a system which included a telescope for sighting, a biodetector assembly containing biological transducers, electronic
signal conversion equipment, EM artifact detection equipment, and a
video attachment for the production of biograms.
In the eighty page
patent document entitled "Methods and Receiver for Biological Data
Transport" (see Appendix B), Dr. Lawrence sites five different
methods of signal processing translators as follows:
-
Bridge Method - Biological semiconductors exhibiting electrical
resistance changes due to external signal impingement may be
arranged in a classic Wheatstone bridge arrangement (see schematic
in previous issue).
-
Capacitance Method - Biological semiconductors expressing
variations of capacitance during stimulus events may be embodied to
function as a frequency-control element in an oscillator of the FM
type. Read-out may then be secured by means of a frequency counter
or equally suited device. High impedance or optical devices are used
to sense given piezoelectric phenomena accompanying capacitive
reactions.
-
Electrostatic Method - Biological semiconductors which are electrostatically active (active charge acquisition and depletion)
as a result of local excitation and the presence of external
biodynamic signal events may be read out by means of a
charge-coupled device (CCD) or on photographic film.
-
Optical Method - Biological semiconductors evidencing optical
properties of a primary (luminescence) or secondary (transparency
alterations) type during signal incidence may be read out by means
of photoelectric devices and Bragg cells.
-
Self-Potential Method - Biological semiconductors expressing
changes in electrical self-potentials due to signal incidence, may
be amplified by non-loading high impedance devices such as
electrometers.
As we can see, there are a variety of means by which we may obtain
and translate signals of a biodynamic character in biological
semiconductors.
It must be remembered, however, that biological
materials exhibit characteristic actions of their own due to normal
living cell function. It is the sensitization or excitation duty
either as a service of the processing method or induced separately
which will suspend these functions to secure diagnostic control over
natural and inter-communicatively induced responses of living cells.
In our experiments, methods 1, 2, and 5, offer the most continuously
successful procedure of biodynamic signal procurement, and are also
the most cost effective.
The repeated success of this
instrumentation may be primarily due to the combinative
sensitizing/receiving nature of the acquiring method.
Image Acquisition and Biograms
Early on in the RBS experiments, Dr. Lawrence developed a means by
which biodynamic signals could be translated into video images.
Although he spoke of using CCD technology as an ideal, he favored
the most basic biological data display technique of using facsimile
recording. This system simply injects the electrical signals
produced by the biological semiconductors into a type of AM
modulator.
This modulates a given frequency band in such a manner so
that varying amplitudes are a precise reflection of the modulating
direct current product which can then be rendered into facsimile
images. In our experiments, we have utilized the same protocols with
greater flexibility regarding image resolution and acquisition.
In the first system we used to produce
biogram, the signal
processing translator’s modulated biodynamic signal output was fed
directly into a PC via a Digital Signal Processing (DSP) interface
(first tests were conducted on an old 80386 but for portability and
speed, a Pentium 100 laptop was used).
Special software was used to
provide the images on the screen which could then be saved and later
printed out.
The Biograms we generated begin with a complex of
individual frequency components and harmonics of the modulated
biodynamic audio output, which covers a wide frequency range and
varies in intensity over time. The software simply plots the
frequency content of the biodynamic signal as a function of time
with harmonic intensity represented by a variable color scale.
The
software uses a mathematical Fast Fourier Transform (FFT) in
performing the frequency analysis. FFTs are usually specified by the
number of input data points used in each calculation. For a sampling
rate of F (cps), an N input point FFT will produce a frequency
analysis over a frequency range of F/2.
Signal amplitude will be
calculated at N/2 frequency increments in this range.
The software
provides both narrowband and broadband processing options.
Narrowband processing produces a display of high frequency
resolution which resolves the individual harmonics of the audio
sample.
Broadband processing broadens the frequency response of the FFT and produces a display which smoothes over the individual
harmonics to show broad areas of intensity.
To simplify, the
software package samples the input, performs an FFT, and graphs the
output in the form of a 3D time-frequency plot or spectrogram, where
one axis is time, the second is frequency, and the vertical axis is
the signal level at the specific time and frequency.
These Biograms
were finally extracted from the complex modulated portions of the
emergent spectrographic image. Then very small sections of the image
- little more than a few microseconds in duration - were enlarged to
an appropriate viewing magnification.
These completed Biograms could
later be rendered into video presentations in a frame-by-frame
sequence.
While this system is not the ultimate in Biogram
acquisition (mainly due to its dependence on the linear time
constraints of the received signals), it presents specific imaging
of the perceived biodynamic modulations. One of the major advantages
of this system is that the AM modulated biodynamic signals can be
recorded and stored on analog or digital media to be later played
back for image processing.
Our newer system involves a more direct approach to image
acquisition,
although it is still impaired by the linearity of time. In this
system, real-time Biograms are produced utilizing software and some
hardware designed for radio-facsimile reception. This method is
closer to what Dr. Lawrence used with the exception that it is
easier to control specific parameters through the computer software
applications.
It was Dr. Lawrence’s goal to secure biodynamic signal images
without the need for a time dependent scanning process - to procure
complete frames instantly - much like the older Radionic systems of Drown and De laWarr.
Since Dr. Lawrence assumed the character of
biodynamic information was strictly of an eidetic nature (meaning
that its reception is in the form of whole images), and it appeared
to propagate in a longitudinal (time independent) fashion, the prior
systems of instant frame acquisition would be ideal.
Charge-coupled
device (CCD) technology while promising, is expensive and provides a
somewhat distorted biodynamic image resolution. Photographic film
techniques, while procuring the highest resolution images, are time
consuming and relatively unmanageable in most field situations.
Work
is currently in progress to modify and develop similar systems in
conjunction with present technology.
Field Tests and Biodynamic Signal Acquisition
L. George Lawrence spent much of his time in isolated desert
locations performing remote biological sensing operations.
Many
parts of the desert are free from electromagnetic interference which
can complicate biodynamic signal interpretation, so it is an ideal
place to perform experiments in remote biological sensing. As we
have already discussed, Dr. Lawrence’s system incorporated many
instruments in his field operation system. This system is best
observed in the patent figures and instrumentation diagrams.
A typical field operational setup for remote biological sensing
includes the following: An astronomical telescope, a Faraday chamber
that contains the biological transducer complex, a rotating shutter
for "chopping" incident electromagnetic interference for easier
detection, a temperature controller, a regulated power supply, a
local oscillator to permit an AC-rendition (for AC recording) of the
data envelope modulated by a DC amplifier, and final recording of
data by a field recorder.
A processing amplifier and meter provide
primary, unmodulated monitoring of the incoming signals.
Initially, Dr. Lawrence conducted his field experiments with the
goal of obtaining signals from living systems such as Joshua trees.
He would simply inject a premeasured amount of DC electricity into
the tree by remote control while training the sights of his field
equipment containing the biological transducers directly on the
subject tree.
As the tree began to respond to the current, the
biological transducers would simultaneously react to the irritation
experienced by the tree. Increasing the distance from the subject
(up to several miles) proved no obstacle to the reception of signals
with no decrease in signal intensity. With these many inaugural
tests, Dr. Lawrence was able to perfect his system of the reception
of biodynamic signals.
The RBS field equipment in current use at BSRF (see photo
top page) is nearly
identical to Dr. Lawrence’s with a few minor adaptations and
modifications. In comparing the photo with the diagram, one can see
that our system has been condensed into a smaller package, and this
is mainly due to technological advances in the miniaturization of
specific components since Dr. Lawence’s day.
The telescope, a 4.5
inch reflector with equatorial mount and motor drive, is standard
and is identical to the one used by Dr. Lawrence.
The Faraday
chamber has been reduced in size, and incorporates specific
geometric proportions (the Golden Section) for optimum Biodynamic
signal procurement. The system is "shutterless" as incident
electromagnetic interference is easily detected within the biomass
cavity by a highly sensitive EM probe (newer designs in
biodynamic
sensor technology are completely insensitive to any EMR and need no
shielding).
Temperature control and monitoring is also done from
within the biomass cavity. All electronics for monitoring incoming
signals are housed in a single unit, and the field recorder is of
the microcassette type. A countdown timer is used to indicate time
elapsed, and to signal the end of the tape. In addition to the
standard equipment, a laptop portable computer is used to
continually render images of the modulated biodynamic signals for
visual monitoring while in the field.
Ancillary equipment may
include star chart software, magnetometers for monitoring
geomagnetic disturbances, and various other electronic devices used
for detecting EM artifact.
References
1. Galactic Life Unveiled - The Phenomenon of Biological
Communication Between Advanced Life in Space and Its Subliminal
Effects on Terrestrial Man, by L. George Lawrence, Borderland
Sciences, 1997. 2. "Methods and Receiver for Biological Data Transport," L. George
Lawrence. Abandoned patent, 1981. 3. "Cinema 2000: The Quest for Extraterrestrial Video," L. George
Lawrence, Electronics and Technology Today, March/April 1992.
4. "Interstellar Communications Signals," L. George Lawrence, Ecola
Institute Bulletin #72/6A, Reprinted in Borderlands, 1st Qtr., 1996.
5. "Are We Receiving Biological Signals from Outer Space?," L.
George Lawrence, Popular Electronics, April 1991. 6. "The Starland Galactic Transmission Theatre," L. George Lawrence.
Unpublished. 7. "Biological Image Transmission," L. George Lawrence, 1989.
Unpublished.
Literature and Patents
1. Charge and Field Effects in Bio-systems, by W.J. Aston, Abacus
Press, Turnbridge, UK 1984, pp.491-498. 2. Electrophysiological Methods in Biological Research, by J. Bures,
Academic Press, N.Y., 1967. 3. Organic Semiconductors, by F. Gutmann and L.E. Lyons, Wiley,
N.Y., 1967. 4. "Biosensors," by C.R. Lowe, Trends in Biotechnology, Elsevier,
Amsterdam, 2:3, 1984, pp. 59-65. 5. Biosensors: Fundamentals and Applications, by A.F.P. Turner,
Oxford Univ. Press, Oxford, UK, 1987. 6. "Sensor Having Piezoelectric Crystal for Microgravimetric
Immunoassays," U.S. Patent 4,735,906, G.J. Bastiaans, April 5, 1988.
7. "Immunoassays For Antigens," U. S. Patent 4,242,096, Oliveira,
R.J. and S.F. Silver, December 30, 1980. 8. "Sandwich Immunoassay Using Piezoelectric Oscillator," U.S.
Patent, 4,314,821, T.K. Rice, February 9,1982. 9. Biosensors and Bioelectronics, Vol 12, No. 4, 1997.
BIBLIOGRAPHY OF
L. GEORGE LAWRENCE
(Scientific, Engineering, and General Publications 1962-1992)
I. Engineering and Scientific
Textbooks
1. Electronics In Oceanography,
H. W. Sams, Bobbs-Merrill Co., Indianapolis-New York, 1967.
2. Grundlagen der Lasertechnik (Fundamentals of Laser
Technology), F. Viehweg & Solin, Braunschweig, 1964.
3. DC Instrumentation Amplifiers, H.W. Sams, Bobbs-Merrill
Co., Indianapolis-New York, 1965.
II. General Technical Books
4. Inventor's Idea Book, H. W.
Sams, Bobbs-Merrill Co., Indianapolis-New York, 1965.
5. Inventor's Project Book, op. cit., 1971.
III. Engineering Papers and
Feature Articles
6. "Remote Control for
Motion-Picture Cameras," J. Soc. Motion Picture and
Televsion Engineers, N. Y., 71:13-14, January, 1962.
7. "Schnellabgfeich von Fernsehempfängern," (IF Alignment of
TV Receivers), Funkschau, Munich, 16:449.452, August, 1963.
8. "Fernsehsysterne für Tiefraum-Astronomie," (TV Systems
for DeepSpace Astronomy), Elektronik, Munich, 13:11, pp.321,
356-368, November, 1964.
9. "Magnetostriktive Verzögerungstechnik," (Magnetostrictive
Delay Technology), op. cit., 13:4, pp. 99-100, April, 1964.
10. "Microwave Educational Television: System Planning and
Installation," Electronics World, N.Y., May, 1967, pp.34-36.
11. "Biophysical AV Data Transfer," AV Communications
Review, Washington, Summer 1967, 15:12, pp.145-52.
12. "Electronics for Speech and Hearing Therapy,"
Electronics World, N.Y., 78:3, September, 1967, pg. 44,ff.
13. "Communications via Touch," Electronics World, N. Y.,
79:5, May, 1968, pg. 32, if.
14. "Early Warning Systems for Earthquakes," Electronics
World, N.Y., 79:6, June, 1968, pg. 37, ff.
15. "Automatic Diplexers for Voice Communications,"
Radio-Electronics, N.Y., 39:9, September, 1968, pp.48-SO.
16. "Resource Television in Teacher Education," National
Education Association (NEA): J. Audiovisual Instruction,
13:9, November, 1968, pp.997-998.
17. "TV Systems for Teacher Education," Electronics World,
N.Y., 81:1, January, 1969, pp.42-44.
18. "Geomagnetic Observatories," Electronics World, N.Y.,
81:2, February, 1969, pp.41-44.
19. "Electrohydraulic Effect," Electronics World, N.Y.,
81:5, May, 1969, pg. 44, if.
20. "Experimental Laser Engines," Electronics World, N.Y.,
81:6, June, 1969, pp.30-32.
21. "Electronics and the Living Plant," Electronics World,
82:4, October, 1969, pp.25-28.
22. "Starting an Audiovisual Department from Scratch,"
National Education Association (NEA): J. Audiovisual
Instruction, 14:7, September, 1969, pp.29-31.
23. "Taxonomy TV Cue Injector," Ibid.: AV Technical Notes,
14:7, pp.74-75.
24. "Lasers for Educational Video Traffic," Ibid: AV
Technical Notes, January, 1970, pp 90-91.
25. "Electronics and Parapsychology," Electronics World,
N.Y., 83:4, April, 1970, pp.27-29.
26. "Electronics and Meteorites," Electronics World, N.Y.,
84:1, July, 1970, pp.23-26, ff.
27. "Confirming the Backster Effect: Electronics Proves
Plants Can Feel," FATE, 23:11, November, 1970, pp 38-44.
28. "Experimental Electro-Culture," Popular Electronics,
N.Y., 34:2, February, 1971, pp.66-70.
29. "Plants Have Feelings, Too," Organic Farming &
Gardening, Emmaus, Pa., April, 1971, pp.64-67.
30. "More Experiments in Electro-Culture," Popular
Electronics, N.Y., 34:6, June, 1971, pp.63-68, ff.
31. "Interstellar Communication," Electronics World, N.Y.,
86:4, October, 1971, pp.34-45, ff.
32. "Instrumentation Balloons," Electronics World, N.Y.,
86:6, December, 1971, pp.13-15.
33. "Animal Guidance Systems," Electronics World, N.Y.,
86:6, December, 1971, pp.27-29, ff
34. "New Worlds Revealed by Living Transducers," Electrical
Review, London, June 2, 1972, pp.780-81.
35. "Treasure Detectors for Land Use," Popular Electronics,
N.Y., 2:3, September, 1972, pp.52-55.
36. "Underwater Treasure Detectors," Popular Electronics,
N.Y., 2:4, October, 1972,pp.60-61
37. "Electric Power from the Earth," Popular Electronics,
N.Y., April, 1973, pp.32-34.
38. "Electronics and Water Quality Control," Popular
Electronics, N.Y., May, 1973, pp.45-49.
39. "How to Select an Electronic Organ," Popular
Electronics, N.Y., June, 1973, pp.45-49.
40. "Electronics and Brain Control," Popular Electronics,
N.Y., July, 1973, pp.65-69.
41. "Electronics and Insect Control," Popular Electronics,
N.Y., August, 1973, pp.30-32.
42. "Biological Signals from Outer Space," Human Dimensions,
HD Institute, Buffalo, 2.2, Summer, 1973, pp.16-18.
43. "Build a Hall-Effect Magnetometer," Popular Electronics,
N. Y., 5:5, May, 1974, pp 48-52.
44. "An Electronic Saltmeter for Family Health," Popular
Electronics, N.Y., October, 1974, pp.33-36.
45. "Electric Power from the Sun," Wireless World, October,
1976, pp 50-54.
46. "Investigating UFO's and other Magnetic Phenomena",
Popular Electronics, N.Y., May, 1978, pp.41-46.
47. "Occult Electronics, Part 1," Electronics and Technology
Today, Feb/March 1991, pp 24-27.
48. "Occult Electronics, Part 2," Electronics and Technology
Today, April 1991, pp 26-29.
49. "Interstellar Communications Signals," Ecola Institute
Bulletin #72/6A, Reprinted in Borderlands, 1st Qtr., 1996.
50. "Are We Receiving Biological Signals from Outer Space?,"
Popular Electronics, April 1991, pp 58-63.
51. "Cinema 2000: The Quest for Extraterrestrial Video,"
Electronics and Technology Today, Mar/April 1992, pp 30-44.
|